Micrometers (Exterior and Interior)
Mitutoyo Digimatic Micrometers are manufactured with ABSOLUTE technologyTM, which allows the position to be recognized at the moment of switching on without the need to configure the origin, therefore Mitutoyo equipment will always be ready to be used, the versions with data output facilitate the collection of data for the inspection of serial products. DIGIMATIC micrometers include an SR44 battery, with a long life of up to 1.2 years with normal use.
The high-accuracy Digimatic Micrometers, ideal for measurements with a minimum indication of 0.1µm and an error of +/-0.5µm, prevent the transmission of heat from the hand with an insulating cover, to minimize the error due to thermal expansion, their tips are made of carbide and is available in mm, in.
Mitutoyo has a wide variety of micrometers with different tips for a wide variety of uses and applications, such as: tips for measuring screw threads, measuring gears, measuring tubes, measuring slots, can edges, etc.
There are DIGIMATIC micrometer models with interchangeable tips, ideal for when more than one micrometer is needed to make measurements, to be able to have the possibility of making measurements in large ranges in a single tool.
Hole Measurement
If you need to measure holes, the Mitutoyo Hole Meters are widely recommended for their precision and ability to measure holes of different sizes. Mitutoyo has revolutionized this equipment by creating the Holtest and Borematic, which through 3 tips allow us to center the measurement. , increasing the precision of our measurements. These devices have ABSOLUTE technology and coolant-proof protection (IP65).
The DIGIMATIC, Holtest Digimatic and Borematic micrometers have a large digital screen that allows us to quickly and reliably read the measurements. In addition to having functions to position the zero, or make conversions between mm/in scales within the accessories for micrometers, we also find the U-WAVE and U-WAVE Bluetooth data transmission systems.
When it is required to carry out an inspection on a production line without the need for contact or to stop the continuous production process, Mitutoyo includes laser micrometers in its catalog that allow for online measurements, with a pass/no-go judgment, which allows the line to be stopped in case of present a piece out of tolerance.
